Lightbearing Outside Waistband

Lightbearing Outside Waistband

Starting at $93.99

Comfortably and safely Carry your firearms with our minimalistic KYDEX Holster design. Our KYDEX holsters provide you with full trigger guard protection and perfect retention. All ANR Design holsters come suppressor sight ready up to 0.450″ tall. (Scroll down for full details)


(36 customer reviews)

30-Day Manufacturing Warranty

Comfortably and safely Carry your firearms with our minimalistic KYDEX Holster design. Our KYDEX holsters provide you with full trigger guard protection and perfect retention. Made with the highest quality materials available, our KYDEX holsters are built for hard use, standing up to the punishment of our sponsored competition shooters and everyday users. Our Outside the waistband holsters are designed to hug the body limiting the chance of hooking or snagging objects while performing everyday activities. All ANR Design holsters come suppressor sight ready up to 0.450″ tall.

DISCLAIMER: Fits up to 0.450 Height Sights. If you have a REAR sight mounted in front of your RDS, optic cut may NOT accommodate the distance needed to clear. ANR is not responsible for ill-fitting holsters that may have issues because of this set up. ANR does not apply Loctite to hardware screws, please apply Loctite and set the desired retention before use.

All ANR Holsters are Optic Cut

**DISCLAIMER We do NOT support third party/aftermarket rail adapters for ANY firearm listed. No refunds or returns on holsters ordered for non OEM fitting lights.**

WARNING: Use of this product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to:

Check out the video below!

36 reviews for Lightbearing Outside Waistband

  1. Antonio Beltran

    Amazing quality, attention to detail, and comfort as I find with all these products. You can tell there is a lot passion put into this craft. This isn’t like any other holster on the market. It’s an ANR holster which stands out from the rest. I use this at the range all the time. It’s amazing.

  2. paul

    fits my sig p320 tacops with light perfectly. no adjustable retention but it really doesn’t need it. i got kryptek highlander to match the rest of my gear and a matching mag holder. i use it when shooting steel in the desert.

  3. Anthony Avila (verified owner)

    This is by far one of the best holsters I’ve purchased. We’re well designed and slim with some of the best retention for a light bearing weapon. I highly recommend the product and plan on using thIs holster in some of my classes. Well worth the price.

  4. Jacob A (verified owner)

    I’ve used MANY brands of Kydex holsters over the years for work and personal carry and I have to say these are one of the better options there, for sure. The light bearing OWB holsters are very well made and sit nicely on a belt. The retention is perfect and does not need adjusted at all. This was my first time purchasing an ANR Design holster and I will absolutely be getting more.

  5. John Quinlan (verified owner)

    Excellent holsters. I have many kydex light bearing OWB holsters from various companies and the two I already have from ANR are my favorite. I will be ordering more in the future and I recommend them to all my friends/coworkers in LE that carry or plan on carrying. The same can be said for ANR IWB holsters, which are quite comfortable. Retention for both IWB and OWB are also great with no play or falling out.

  6. taylorbibeau26 (verified owner)

    This holster is exactly what I needed to complete my CZ P07 project/build. Everything fit perfectly , there was not issues with the suppressor height sights, RMR, or threaded barrel on my gun when drawing or holstering the gun. Nothing seems cheap or rushed on the holster , it really does feel like a quality product and I have already recommended a few friends to get their own ANR holster.

  7. Timothy Hartley (verified owner)

    This holster is just what I wanted for a Outside Waistband holster.

  8. Mike Dobel (verified owner)

    Great holster. Makes carrying a full-size P-10F with TLR-1H light a breeze. Also came in Gods Plaid, M81 Woodland Camo. You can’t beat A&R.

  9. Andrew Biesemier (verified owner)

    I asked my buddy for recommendations for an OWB holster for my G19 and his top choice was to get one from ANR. Very pleased that I heeded his advice. Fits the contours of the gun+light like a glove.

  10. John Doe

    Everything about my experience ordering from ANR was great. I ordered a custom holster for a relatively uncommon gun/light combo and it arrived less than a week after the order was submitted. The quality of the product is top notch. ANR is my go-to for holsters from now on.

  11. Alexander Stiff (verified owner)

    Got one for my P 09 and P07. Amazing fit and feel, holds it close to the body and the gun sits in there nice and snug. Great Value for the price

  12. Greg (verified owner)

    Fit my cz p10f with a tlr-1 perfect. So happy they make such high quality holsters for cz. Lead time was as expected and shipping got here a day early. Will definitely support anr for life and spread the word

  13. Mack Dowl (verified owner)

    The last holster you will ever need. I ordered this with the flat pancake loops for my everyday belt, this option holds your firearm extremely close to your body. It is nearly as invisible as IWB options, provided the shirt is long enough, and comfort is unparalleled. Fit and retention is excellent, gives a nice positive ‘click’ on insertion, and I can hold the holster upside down without dropping my Glock. Works excellent on my range belt as well, after a quick belt loop swap to accommodate my 2″ Belt. Ran a very intense scenario in a trauma medical class, and at no point was I concerned about loosing my pistol. Best of the best

  14. James Stanislawski (verified owner)

    Great holsters for polymer 80. Fit and finish is great and good retension. Wish retention was adjustable tho.

  15. James Stanislawski (verified owner)

    Great holsters for polymer 80. Fit and finish is great and good retension. Wish retention was adjustable tho.

  16. Ian Johnson (verified owner)

    Picked up the owb light bearing holster for my FN509compact. Kudos to ANR for being the only company I could find that makes a light bearing holster for that pistol! And what a great holster they’ve made! Fits perfectly with a snug click. Great attention to detail. Very, very, well made. Their website is mercifully easy to navigate and their manufacturing/shipping was exactly as advertised. I’m impressed and will soon be ordering more holsters in different configurations. I really couldn’t be happier with my purchase from ANR.

  17. Ryan Hammer (verified owner)

    I have been using an IWB from ANR for several months now, based on the recommendation of my firearms instructor. It’s what he uses. I also make my own kydex holsters, but was having trouble making one for my EDC pistol with a light. There is NO WAY I could make a holster this nice on my own! After using my IWB for some time I decided to get another from ANR that was OWB. It’s just as good as my first. Thank you guys for such a great product.

  18. Jonny Bravo (verified owner)

    Excellent option for a OWB Polymer 80 holster. I bought this for my subcompact with a light and a red dot. The fit is excellent. Very good retention as well. Great work ANR!

  19. Vincent F (verified owner)

    Ordered one for my VP9. Perfectly reasonable lead time, it actually arrived sooner than I expected. Right out of the box retention was positive and the pistol clicked right into place. Sits on my waist and doesn’t slide back and forth. Will definitely be a return customer.

  20. Joe (verified owner)

    Solid design. Fits pistol with mounted light extremely well.
    Would recommend their product if you are considering it.

  21. Michael Goodman (verified owner)

    When I first received my OWB holster made custom for my FN 509 Tactical with Valkyrie PL Mini 2 light and RDS I was impressed by the details I saw molded into the Kydex. It appeared every tiny detail of the weapon and light had been worked into the mold. The Hexcam Specter13 Kydex pattern looked awesome. However, upon attempting to slide my 509 into the holster I was surprised at how tight the fit was and how much force was needed to fully seat it in the holster. It was so difficult to fully holster it I intensely scrutinized how it was seated in the holster thinking the light must not be in the same position as was molded into it however it just so happened that the position of the light on the rail matched the mold absolutely perfectly. So then I attempted to draw the 509 out of the holster and it was incredibly difficult. My surprise turned to shock once I finally was able to withdraw it from the holster and inspected the slide. THE FINISH OF MY BRAND NEW FN 509 TACTICAL WAS COMPLETELY REMOVED FEOM SEVERAL PARTS OF BOTH SIDES OF THE SLIDE AND THE TOP CORNERS OF THE SLIDE, AFTER ONLY BEING HOLSTERED AND TAKEN OUT OF THE HOLSTER ONCE!!! While it’s a tool and I expected wear over time I didn’t expect my brand new tool that’s never been used or holstered to immediately look like an LE trade-in! I don’t have much experience with Kydex holsters but in my research I had found that when molded properly the tension should be put on trigger guard thus not wearing the slide much if at all over time. I’m just that is not at all what I have in my new ANR holster and am incredibly disappointed. Extremely unhappy with the fit and the immediate wear to my finish that this holster has caused.

    • Alex Costa

      Mr. Goodman, We reached out to you via email asking for you to provide pictures of the “damage” almost 5 days ago. We have gotten NO responses or photo evidence of the issues stated above. KYDEX cannot removed metal from the finish. You may be witnessing kydex residue that can be easily cleaned. Residue sometimes looks metallic on certain finishes. CS would be more than happy to adjust the tightness of the holster. It does require some level of returned communication from you to help resolve what ever the issue may be. Thanks again for your purchase and patience.

  22. dave_sandlin (verified owner)

    Bought this holster with injection molded loops for a couple classes I attended and waited to review it until i was able to see how it did.

    I am glad i made this purchase. Did exactly what I needed, felt like the perfect amount of retention. Fit was perfect and I couldn’t find a flaw when it arrived. Belt loops were just the right size for my leather gun belt.

    Lead time estimate was accurate and more than acceptable for a fine holster.

    Will buy again for other applications as needed, and will be ordering some pancake loops for it, as well as other holsters for future carry needs.

    Buy with confidence. You get what you pay for.

  23. Kyle Mayfield (verified owner)

    Absolutely love my OWB light bearing holster. This company is making them right! I would with out a doubt recommend this company to anyone interested in a good holster. I will be ordering from this company more in the future. Keep up the great work!

  24. Gaige (verified owner)

    Great craftsmanship, good design, and quick customer service. Hard to beat! I would absolutely buy from them again.

  25. JayDee (verified owner)

    My ANR Design holster arrived today for my Glock 29 with a light mounted. Great fit and fast turn time from order to in hand. The 10 mm Glocks don’t get many options these days so I really pleased. Next will be a holster for my G20 set up as a competition gun.

  26. David Scafe (verified owner)

    Got my holster last week. So far the fit and feel of it are great. I love how close it rides to the body.

  27. kamakaz1961 (verified owner)

    I am new to the holster world and Scott at Cajun Gun Works recommended me to ANR. I bought an OWB holster from a competitor for my Glock G17. Stupid move. Hating it. I decided to give ANR a shot because of Scot. I have a P01 with an Olight PL-Mini 2. I had them make me one and WOW what a difference. The quality and the fit is 2nd to none. Just get it from ANR PERIOD!

  28. Brendon (verified owner)

    ANR Designs got my OTW Holster to me ASAP! Good quality and design. Waiting on my gun belt, then will be ready to rock and roll!

  29. Marky Mark (verified owner)

    Amazing! I’ve ordered many holsters from ANR and you can always count on them for solid gear. Got a holster for my Gen 5 G17 w Surefire X300. Fit and finish is amazing like always with their products. Thanks ANR!

  30. Dave Stewart (verified owner)

    Quick service, perfect fit and retention right out of the bag for Masada with TLR-1 HL and Venom optics.

    If I’d done my research, though, I would have ordered the Peniflage.

  31. Jake V. (verified owner)

    *My light bearing OWB just arrived so this is only my initial impression*. The attention to detail is top notch though. ANR holsters definitely live up to the hype and surpassed my expectations. My previous kydex holsters were from MWTS. They make a nice holsters but the ANR shits on them. Im buying the rest of mine from ANR.

  32. Josh (verified owner)

    Not the best at writing reviews. I’m pleased with this product. Bought this to fit my CZ P-10C with my Streamlight TLR-HL. Definitely worth purchasing.

  33. jesseblackjr (verified owner)

    Awesome holster for my shadow system mr920 I ordered the Glock 19 holster fits perfect I will buy again in the future

  34. B. Strouse (verified owner)

    Love the holster retention is great. Very comfortable. I bought an arex delta L which was not on their build options yet. Emailed them and the quickly responded that by end of day website would have Arex delta L as an option. It was and I want to thank ANR I really appreciate the fast response. Would definitely not hesitate to deal with company again

  35. Grant Garland (verified owner)

    Bought an owb light bearing holster for my Rex and it was perfect, very pleased and it showed up quick. You guys are awesome!

  36. Michael W Millwood (verified owner)

    What can I say but… Wow! The holster itself, as well as the shopping, selecting and ordering/shipping experience was nothing short of OUTSTANDING!! Unfortunately, mind you at NO FAULT of ANRDesigns, I selected the wrong light for the OWB light bearing holster for my handgun (CZ P07). As a result, I have a beautifully crafted holster for a handgun/light combo that I can’t use. Again, all my fault, and it will NOT stop me from continuing to shop with them. Great company, great selection of holsters and light options, and FAST order fulfillment and shipping!! I happily recommend ANRDesigns to anyone in the market for both basic and custom holsters!! MWM

Add a review

Your email address will not be published. Required fields are marked *