SALE!
S&W M&P G1/2.0 Baseplate
$29.00 $22.99
M&P Baseplate made 6061 Aluminum and 7 series hard-coat. Design to fit both gen 1 and 2.0 type magazines and spring followers. M&P baseplate is slightly extended forward to help capture the user’s full grip.
NOTE: For 9mm / 40cal / 357 SIG ONLY
In stock
Description
M&P Baseplate made 6061 Aluminum and 7 series hard-coat. Design to fit both gen 1 and 2.0 type magazines and spring followers. M&P baseplate is slightly extended forward to help capture the user’s full grip.
NOTE: For 9mm / 40cal / 357 SIG ONLY
1 review for S&W M&P G1/2.0 Baseplate
Related products
-
SALE!
Add to cartMORE INFOP320 ANVL Magwell
ANVL P320 Magwell is compatible with the current FULL SIZE, CARRY and COMPACT.MEDIUM sized grip modules only. Will only work with 15 & 17 round mags with ANVL Weighted base plate or SIG 21 rnd mags. DOES NOT FIT XCarry grip modules.Easy install, press on with a single rear screw that installs flush to the magwell.Constructed of 6061 Aluminum with a 7 series hard coat anodizing. Elevate your reload accuracy with the ANVL P320 Magwell.
Disclaimer:
**THESE WILL ONLY WORK WITH GEN 2 BASE PADS**
Do not overtighten the screw. Apply a small drop of blue Loctite to the screw before installation. Finger tighten the screw with the Allen key. Once finger tight, only do a quarter to half turn to ensure adequate tightness.$99.00$79.00 -
SALE!
Add to cartMORE INFOSIG SAUER P320 Weighted Magazine Baseplate
Sig Sauer P320 Weighted Baseplates made 6061 Aluminum and 7 series hard-coat. Designed to fit both circle peg spring followers and well as the 21-round rectangle peg spring followers. *Note: Rectangular peg spring followers may need slight modification of spring follower. Removal of 2mm plastic from the front of the spring follower may be needed.
NOTE: For 9mm / 40cal / 357 SIG ONLY
$31.00$26.00 -
SALE!
Add to cartMORE INFOANVL CZ-USA P-10C Baseplate
ANVL CZ-USA P-10C baseplate is a great way to elevate your EDC gun’s function without sacrificing concealment and printing. Manufactured from 6061 Aluminum with Level III Hard Coat anodizing , these baseplates can handle abuse. The baseplates are lightweight and robust. They add weight to the bottom of the mag, for faster reloads. They are taller than factory for easy stripping if there is a magazine stuck malfunction. More durable than factory baseplates that are polymer and can get brittle over time. They also fall into a smaller footprint than the factory so that it fits the EDC magwell.
$29.99$24.99
Andre (verified owner) –
From first impressions it is very well made. Assembly was pretty easy while being a tighter fit which is good. Can not wait to get the pair out to the range for a test run.